Chapter 2 – TOUCH SCREEN MENU

Menu (Configuration)


The Configuration Menu is entered through the Menu key that is part of the four buttons running along the bottom of the Default Display Screen. 

Pressing the Login key at the bottom of the screen will allow the user to enter a login user and password.  Note – users can be set up by logging in with the number 2 and selecting the Security menu option.   User names and passwords are case sensitive.  There are three levels of security for the menu system: Operator, Supervisor, and Administrator.  Pressing the Login button will allow the user to enter a user name and numeric password to log in.  When the menu screen is first displayed, the operator-level menu options are visible. The supervisor menu options will be displayed with the login number 1.  The Administrator menu options will be displayed with the login number 2. 

 

The list of the operator-level menu options is:

  • Logs

  • Client Communications Status

  • Load TC/Auxiliary Analog Input

  • Manual Event Control

  • Shutdown

 

The list of supervisor-level menu options is:

  • Logs

  • Client Communications Status

  • Load TC/Auxiliary Analog Input

  • Manual Event Control

  • Shutdown

  • PID Loop Setup

  • Recipe Edit

  • Load T/C Configuration

  • Trend Chart Edit

 

The list of administrator-level menu options is:

  • About

  • Maintenance

  • Logs

  • Client Communications Status

  • Load TC/Auxiliary Analog Input

  • Manual Event Control

  • Shutdown

  • PID Loop Setup

  • Recipe Edit

  • Load T/C Configuration

  • Trend Chart Edit

  • Communications Setup

  • Client Instrument Setup

  • Zone Assignments

  • Furnace Setup

  • Default Wait Limits

  • Alarm Setup

  • Thermocouple Check

  • Relay Assignments

  • Relay Setpoints

  • Analog Input Setup

  • Analog Output Setup

  • Alarm Polarity

  • Event Hold/Reset

  • Vacuum Gauge Setup

  • Security

  • Custom Curves

  • Alternate PID Setup

  • Aux Analog Input Setup

  • Calibration

  • Configuration

  • T/C Correction Curves

  • Aux Setpoint Configuration

  • Tuning Assistant

  • DF1 Configuration

  • PV Switching

  • Vacuum Leak-up Testing

  • A/I Module Offset Correction

  • Generic Instrument Setup

  • Instrument Calculation

  • Televac Configuration

  • Analog Output Trim

  • MX200 Gas Switching

 

To select any of the menu options, highlight that item by clicking on it, and click on the Detail button.

The Return button will return the user to the default display screen.